750W electric hydraulic pump with manual valve (red)

103.00
        SPECIAL OFFER

          Please select all product options

          Product was out of stock

          share
          Description
          This pump can be used in a variety of hydraulic equipment. When equipped with other hydraulic tools, it can perform a variety of tasks such as lifting, pressing, bending, turning, cutting, assembling, and disassembling. Reduce manual labor and maximize work efficiency. Hydraulic cutting, bending, and splitting machines. Operation: Manual valve control for return oil. Our products are shipped from our local warehouse. We ship via logistics companies such as DHL, YDEL, and UPS. If you encounter any problems, please feel free to contact us. We will serve you within 24 hours. Specifications: Input Voltage: AC 220V 50Hz. Flow Rate: 0.6 L/min (7 MPa) - 5 L/min (7 MPa). Working Pressure: 290 psi - 10152 psi (2 MPa - 70 MPa). Oil Capacity: 7 liters. Motor Power: 750 watts. Motor Speed: 1400 rpm. Machine Dimensions: 25 x 32.5 x 50 cm. Net weight: 21.5 kg. Gross weight: 22.89 kg. Operating instructions (non-linguistic version not yet available): 1. Before using the electric pump, open the oil inlet and connect the power supply before filling. Then, press the black button on the side of the motor to turn it on. Press the manual operation switch (up), then press the manual operation switch (down). After blowing out a few streams of air, press the manual operation switch (down) and turn off the motor connected to the hose. (To avoid damage, the air pressure should not exceed 63 MPa). 2. After connecting the pump to the equipment, start the motor and set the operating valve to the pressure position. After the motor runs for 1 to 2 minutes, the hydraulic oil will enter the cylinder and the hydraulic oil output pressure will increase to 63 MPa. 3. The normal operating temperature of the oil pump is 10 to 50. After continuous high-pressure use, the oil temperature �� 70; please allow it to cool down before use. 4. The pressure setting values ??of the pressure relief valve and safety valve have been set before the pump leaves the factory. Users must not arbitrarily increase the pressure; they can only reduce the pressure according to the actual working pressure, which can extend the service life of the pump station. 5. The motor must be reliably grounded. Packing list: 1 x electric hydraulic pump, 1 x oil pipe (1.8 m), 1 x quick-release box.